Get A Quote

What is Harmonics Mitigation?

In simple terms, harmonics are extra frequencies that when present in an electrical circuit, distort the AC sine wave. A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency.

For example, if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc. Harmonic frequencies are equally spaced by the width of the fundamental frequency and can be found by repeatedly adding that frequency. In the case of the Australian electricity supply, the fundamental frequency is 50Hz. The frequencies of the harmonics are 100Hz, 150Hz, 200Hz, 250Hz, 300Hz, 350Hz and so on. 150Hz is called the ‘third’ harmonic (3 x 50Hz), 250Hz is called the ‘fifth’ harmonic (5 x 50Hz), etc. The presence of harmonics in an electrical system distorts the clean shape of a sine wave.

How do you know if you have harmonics in your electrical system?

If you occasionally experience some unexplained occurrences such as flickering lights, alarms going off, or MCB’s, MCCB’s, RCD’s and Earth Leakage devices tripping for no apparent reason, you are most likely experiencing harmonics in your electrical environment. Other signs are cables running hot, hot switchboards or overheating motors. If you are replacing your motor’s bearings & insulation often, that’s a strong indication of the presence of harmonics.

What are the effects of harmonics in your electrical system?

Harmonics are very harmful within an electrical system and can have serious consequences. For example, the presence of harmonics reduces the life of equipment. It is possible that the investment that you made in your motors & drives will not be realised if they are damaged and need replacing before their expected life span. This can be very expensive.

Harmonics cause things to run hot, which cause stress on the cables and equipment. In the long term, this degrades an electrical system. The presence of harmonics will also mean that although you will get billed for the power that you are supplied, a large percentage of that power may be unusable. Harmonic mitigation is taking action to minimise the presence of harmonics in your electrical system and can achieve great cost savings.

Variable Speed Drives (also known as Variable Frequency Drives) are prolific creators of harmonics in electrical systems and as a result, most of the harmonic mitigation effort focuses on the input side and output side of a VSD.

Different types of Harmonic Mitigation devices

Depending on the specific situation, there are a variety of products that are used to mitigate harmonics. S-Tronics  can assist by conducting a site analysis or simply providing advice based on the details of the particular electrical system.

Description: Three-phase harmonic filters are shunt elements that are used in power systems for decreasing voltage distortion and for power factor correction. Nonlinear elements such as power electronic converters generate harmonic currents or harmonic voltages, which are injected into the power system.

Harmonics are created by electronic equipment with nonlinear loads drawing in current in abrupt short pulses. The short pulses cause distorted current waveforms, which in turn cause harmonic currents to flow back into other parts of the power system.

With any inductive load the reactive component has the effect of impeding current flow and so the net effect is that the current waveform lags the voltage waveform. … The returned power generates losses in the circuits and components and so part of the power is wasted. There is a power factor relating to each harmonic